Autoglym Polar Collection set

Bumper to bumper perfection, all with your pressure washer. With Polar products, car care becomes pure pleasure. That is what Autoglym stands for. In this package you will find all products in 500ml packaging. A perfect gift for anyone who likes to wash their car with a pressure washer.

Contains:
Polar Blast 500ml
Polar Wash 500ml
Polar Seal 500ml

Polar Blast

1. Before you start, check that the body and wheels are cool to the touch and do not work in direct sunlight.
2. Polar Blast can be used in different mixing ratios depending on the desired foam thickness. To start, add 100 ml of product to 500 ml of water in your soap bottle. Adjust the settings of the foam gun if necessary to have more or less foam.
3. Spray Polar Blast onto the car, starting at the bottom, making sure to cover all exterior surfaces, including glass and wheels.
4. Let Polar Blast work for up to 10 minutes to loosen the dirt, but do not let the product dry.
5. Finally, rinse thoroughly from bottom to top.

Polar Wash

1. Before you start, check that the bodywork and wheels are cool to the touch and not in direct sunlight.
2. We recommend washing the car with Polar Blast first, to gently loosen the dirt. Rinse with water first, to loosen heavy dirt.
3. Polar Wash can be diluted to a greater or lesser extent depending on the desired density of the foam. However, we do not recommend using a dilution stronger than 1:1. Adjust the spray gun to produce the desired amount of foam. 250 ml of solution should be sufficient for an average sized car.
4. Spray Polar Wash onto the vehicle starting at the bottom and ensuring all exterior surfaces are covered, including glass and wheels.
5. The cleaning agent will then start to loosen the dirt on all surfaces. If you want a very thorough cleaning result, we recommend applying the foam with a sponge or a washing mitt.
6. Rinse the car thoroughly and dry it.

Polar Wash is not suitable for use on soft tops of convertibles.

Helpful Tip – Next, apply a protective, water-repellent coating with Polar Seal.

Polar Seal

1. Before you start, check that the bodywork and wheels are cool to the touch and not in direct sunlight.
2. We recommend first using a snow foam like Polar Blast to gently loosen the dirt, then using Polar Wash to wash away any mud or grime from your paint.
3. You only need a small amount of Polar Seal. Pour a maximum of 40 ml (four capfuls) into your spray bottle and then add at least 200 ml of water. This amount of ready-to-use product is normally sufficient to treat your vehicle. Using more than 40 ml offers no advantage, as excessive application of the product can worsen the result.
4. Spray Polar Seal onto the clean, wet vehicle, making sure to cover all exterior surfaces, but avoid applying to the windshield.
5. Rinse your car thoroughly and dry it to create a high-gloss finish protected by a water-repellent coating. The car should be towel-dried and not allowed to air-dry as this can leave water spots.
6. Use Autoglym Fast Glass to clean the windscreen and wiper blades to prevent streaks from forming.

We recommend using the product a maximum of once a month.

Polar Seal is not suitable for use on soft top convertibles.

Do not store diluted product. Clean the spray bottle and pressure washer thoroughly with water after use.

Top Tip – Use the Autoglym InstaDry cloth for the best finish.