Sonax Paint protection product PROFILINE Hybridcoating CC One - 50 ml

Single-stage long-lasting coating with a high comfort factor. Protects the paintwork for up to 15 months. Easy and quick application: apply, wipe off, done! Gives the paintwork an intense colour depth and a dirt-repellent, soft, waxy surface. Set of 4 application sponges for 2 applications.

- Vehicle must be scratch-free and completely clean before coating. If necessary, polish by hand or better yet with a polishing machine to a hologram-free shine, only with silicone-free polishes from the PROFILINE.
- Then wipe off with SONAX PROFILINE Prepare and an ultra-fine microfibre cloth.
- To apply the coating, apply a few drops of CC One to the light side of an application pad and apply a thin layer to the paint in a cross pattern. The area to be treated should be approximately half a square meter (1/4 cap).
- After a short exposure time of approx. 3-5 minutes, excess product is wiped away streak-free with a new ultra-fine microfiber cloth. Treat the entire vehicle in this way and then let the coating harden for at least 4 hours. The vehicle must be in a clean and dry environment at all times and the surfaces must not be touched. If the applicator starts to harden during the use of CC One, use a new pad.
- The contents of the can are sufficient for two complete vehicles.

Tip: Every paint behaves a little differently. Therefore, first test the reactivity of the coating on a small surface. Treat a small area of ​​30 x 30 cm and wipe a corner after 2 minutes. If this is very easy, wait another minute and wipe another corner. Then another minute later, until wiping becomes difficult, which means that you have found the longest exposure time for the paint. If you leave the coating on for too long, it can cause wiping problems, streaks and clouds.