Sonax Polish PROFILINE CutMax - 250 ml

Highly abrasive polishing paste, removes scratches and inclusions from painted parts or original factory paint. Leaves minimal processing marks and almost no polishing residue. Easy to process. High material removal with minimal matting at the same time. Removes sanding marks from sandpaper P1000.

- Shake bottle before use.
- Apply the product to the SONAX hard foam pad or the SONAX lambswool pad and polish at low speed and increased pressure for approx. 10 seconds, the machine may tilt slightly for deep scratches.
- Then polish for approx. 20 seconds with little pressure, lay the sponge flat.
- Then place new product on the pad and run a new polishing cycle.
- The times given relate to an average hard paint layer and a surface to be polished of approx. 50 x 50 cm.
- Remove polishing residue with a SONAX microfibre cloth, ultra-fine.
- Then finish with SONAX PROFILINE Perfect Finish.

CAUTION: Do not heat the polishing area. Clean polishing pads regularly and never use different polishes on one pad.